Not sure how to mount your new piece? Don't worry. Whether you have a coat rack,ashelf, or aquilt rack, this installation guide will tell you the exact steps to correctly mount your new piece to the wall. Keep reading to make sure you have everything you need before getting started!
REQUIRED TOOLS / ITEMS:
Phillips head screwdriver
1 general use nail
3 inch screws
Stud finder (For safety and stability, we recommend screwing into a stud*.)
100 pound wall anchors/toggle bolts (*Optional: If not installing into a stud, a minimum of 100 pound wall anchors/toggle bolts is strongly suggested.)
Put your wall item where you'd like it installed on the wall & make sure it is level.
With a pencil, mark the spots where you will be drilling a hole or installing a wall anchor/toggle bolt.
If using a wall anchor/toggle bolt, put your item to be hung down & install the bolt per the manufacturer's instructions.
If you are using a wall anchor/toggle bolt, use a screwdriver to securely tighten into wall.
Next, install the screw into the stud or wall anchor through the open holes from where the wooden plugs were removed.
Install the plugs back into the open holes by gently tapping on them with a small hammer or block of wood.
Measure your area to find the best place to hang your wall-mounted item.
If you will be screwing into a stud (recommended), find your studs with a stud finder.
Remove the wooden plugs from your item by taking a small screw and tapping on them from the inside, and set aside the plugs for now. (See demonstration in video below.) Once you attach your piece to the wall, you will plug up these holes so that the screws don’t show.
And just like that, you're done! We hope you love your new piece that is mounted perfectly on your wall. If you have any other questions, feel free tocontact us!
Choosing a selection results in a full page refresh.